Component Reel LOKBAND™

Component Packaging

LOKBAND® offers superior protection for components packaged in tape and reel. The band fastens to the outer edges of either a 13” or 22” reel, preventing the flanges from crushing together during dry-pack or handling. The LOKBAND® also keeps the reel from unwinding if the protective wrap on the carrier tape detaches. The LOKBAND® fits most 12mm, 16mm, 24mm, 32mm, 44mm and 56mm wide 13” or 22” diameter reels. It is secured around the outer reel edge by snapping the edge together with an attached clip.

• Antistatic properties for ESD protection for packaged component devices
• Ends fasten together with a specially designed clip
• Designed for use with 13” or 22” diameter plastic reels
• Accommodates EIA standard carrier tape widths from 12mm to 56mm
• Available in white or blue.  Please note: LOKBAND® for 22” reels is available in widths from 24mm to 56mm only.

Configuration
The LOKBAND® is available in lengths designed for use with either a 13” or 22” diameter plastic reel. Lengths are 1,035mm (40.75”) for a 13” reel and 1,750mm (68.90”) for a 22” reel. The width of the LOKBAND is dependent upon the width of the reel being used. The LOKBAND® for use with both 13” and 22” reels are available for EIA standard carrier tape widths from 12mm to 56mm. (Note: 12mm and 16mm are not available for 22” LOKBAND®.)

Tape Width
W0
W1
12mm
12.7mm
21mm
16mm
16.7mm
25mm
24mm
24.7mm
33mm
32mm
32.7mm
41mm
44mm
44.7mm
53mm
56mm
56.7mm
56.7mm

Shelf Life and Storage
We recommend that the LOKBAND® be used within 24 months from the date of manufacture. Store this product in its original packaging in a climate controlled environment where temperature ranges from 21°C +/- 17°C (70°F +/- 30°F). Allow the product to stabilize at room temperature prior to use. This product is not affected by humidity.

LOKBAND™ Material Properties
Note: The values presented for this product are typical laboratory data and are subject to change without prior notice. The bands are antistatic coated through immersion in solution. Re-use of this product may degrade the antistatic properties.

Property
Typical Value
Test Method / Standard
Surface Resistivity
<1011 ohms/square
ASTM D-257
Material (Band)
Low Density Polyethylene (LDPE)
N/A
Material (Clip)
Polypropylene
N/A
Shelf Life (Antistatic Protection)
24 months
N/A
Colour (Band)
White or Blue
N/A
Colour (Clip)
Black
N/A

LOKBAND™ Part Numbers (For use with 13” Reels)

Part Number
Width (mm)
Length (mm)
Qty/Box
LB10412AD
12
1,035mm (40.75”)
165
LB10416AD
16
1,035mm (40.75”)
150
LB10424AD
24
1,035mm (40.75”)
120
LB10432AD
32
1,035mm (40.75”)
90
LB10444AD
44
1,035mm (40.75”)
75
LB10456AD
56
1,035mm (40.75”)
60

LOKBAND™ Part Numbers (For use with 22” Reels)

Part Number Width (mm) Length (mm) Qty/Box
LB17524AD
24
1,750mm (68.90”)
80
LB17532AD
32
1,750mm (68.90”)
60
LB17544AD
44
1,750mm (68.90”)
50
LB17556AD
56
1,750mm (68.90”)
40