Dicing Tape ProFilm DX102F

Wafer Dicing Tape

ProFilm™ DX102F is a protective surface film designed to assure consistent, precise and repeatable wafer production yields. Utilising superior coating technology, ProFilm™ DX102F offers Total Thickness Variation (TTV) control, expandable base film and a special low extractable release liner to significantly reduce silicon residue.

• Specially formulated polyolefin film for unparalleled protection
• Coated with stable bond pressure sensitive adhesive
• Features expandable, chloride free, base film
• Results in consistent release of sawn die
• Film is transparent and untinted to help human and electronic defect recognition

Construction
ProFilm™ DX102F is constructed in three layers:

• Polyolefin Base Film (3.5Mils)
• UV Sensitive Adhesive (0.5Mils)
• Release Film (0.92Mils)

Configurations
DX102F is available in a variety of configurations. Standard widths include 200mm, 230mm, 250mm, 275mm, 300mm, 330mm and 400mm. Rolls are provided in splice-free lengths of 100m on a 3” I.D. plastic core. Both custom widths and lengths may be available by special request. ProFilm™ DX102F rolls are polybag wrapped and individually boxed.

Shelf Life and Storage
ProFilm™ DX102F should be stored in a climate controlled environment where conditions do not exceed 25°C (75°F). If stored as recommended, the product will yield a shelf life of 12 months from the date of manufacture found on the core label.

ProFilm DX102F Material Properties
1 Bond Test on Stainless Steel Wafer at 180° peel angle and 300mm/min peel and stretching speed.
The values presented for this product are typical laboratory data and may be changed without notice.