ProFilm™ DU099H is a protective surface film designed to assure consistent, precise and repeatable wafer production yields enhanced with superior ultraviolet adhesive coating technology, ProFilm™ DU099H features Total Thickness Variation (TTV) control, expandable base film, and a special low-extractable release liner to significantly reduce silicon residue.
ProFilm™ DU099H is constructed in three layers:
ProFilm™ DU099H is available in a variety of configurations. Standard widths include 200mm, 230mm, 250mm, 275mm, 300mm, 330mm and 400mm. Rolls are provided in splice-free lengths of 100m on a 3” I.D. plastic core. Both custom widths and lengths may be available by special request. ProFilm™ DU099H rolls are polybag wrapped and individually boxed.
Shelf Life and Storage
ProFilm™ DU099H should be stored in a climate controlled environment where conditions do not exceed 27°C +/- 10° and 30% RH +/- 20%. This product is sensitive to UV light, so store away from heat and direct sunlight. If stored as recommended, the product will yield a shelf life of 12 months from the date of manufacture found on the core label.
ProFilm DU099H Material Properties
The values presented for this product are typical laboratory data and may be changed without notice. 1UV exposure of 300 mJ/cm2.
|Property||Typical Value||Test Method / Standard|
|Adhesive Strength 1||250g min before UV (20 min.)
15g after UV1
|ASM D 1000|
|Tensile Strength||15 N/mm2 MD
9 N/mm2 MD
|ASTM D 882|
|ASTM D 882|
|Thickness w/o Release Liner||99μ (3.9 mils)||ASTM D 1005|
|Temperature Resistance||>5 min. @ 40-45°C||–|