13” Trimline Component Packaging Reels LOKREEL®

Component Packaging

If price is a key concern LOKREEL® Trimline plastic injection-molded packaging reels are a great option. LOKREEL® Trimline packaging reels are constructed using less plastic material per reel, resulting in a lower cost than our premium LOKREEL® Pro series. LOKREEL® Trimline reels offer an excellent balance between structural integrity, lower weight and lower cost.

  • Shipped in halves to decrease shipping costs by up to 70%
  • “Nest-stacked,” high-density packing reduces needed storage space by as much as 60% when compared with a single molded assembled reel
  • Halves configuration offers flexibility in managing the different reel widths needed during production—from 8mm to 32mm
  • Reels assemble with simple twisting motion, requiring no gluing or fasteners

Configuration
LOKREEL® Trimline reels have an outer diameter of 13” (330mm) and a 1/2” (13mm) diameter arbor hole. The hub diameter is 4” (102mm), suitable for most carrier tapes. Reel halves are available in hub widths of 4mm, 8mm, and 16mm, which combine to produce reels for EIA standard carrier tape widths from 8mm to 32mm. The table demonstrates LOKREEL® Trimline half combinations and the reel widths they produce.

Reel Width (mm) LOKREEL® Lite Flange Combinations
8 4 + 4mm
12 4 + 8mm
16 8 + 8mm
24 8 + 16mm
32 16 + 16mm
44 16 + 28mm
56 28 + 28mm

Shelf Life and Storage
We recommend type RD Antistatic LOKREEL® Trimline reels be used within 2 years from the date of manufacture. Store this product in its original packaging in a climate-controlled environment where temperature ranges from 21° C +/- 17°C (70°F +/- 30°F). Allow the product to stabilize at room temperature prior to use. The mechanical integrity of the product is not affected by humidity.

Antistatic LOKREEL® Properties
Note: The values presented for this product are typical laboratory data and may be changed without notice.
* Excessive handling may reduce the static dissipative properties.

Property Typical Value Test Method / Standard
Tensile Strength 3,500 PSI ASTM D-638
Elongation 40% ASTM D-638
Flexural Modulus 280,000 PSI ASTM D-790
Vicat Softening 98°C (210°F) ASTM D-1525
Specific Gravity 1.04 g/cc ASTM D-892
Surface Resistivity (Antistatic) ≤1011 ohms/square ASTM D 257 Static Dissipative per EIA 541
Colour Black N/A

 

Hub Width 4″ Diameter Hub Qty Per Box
4mm RD33404EL 50
8mm RD33408EL 50
16mm RD33416EL 50
Download PDF spec sheet of this product here

Automated Systems

Anti-Static Bag

Content here

Desiccant – Acticated Clay Bags

Activated clay bags are made from Bentonite clay, which is a naturally occurring mineral unlike our other synthetic desiccants, making it more economical. At 20% RH, these desiccants will absorb 50% more moisture than is required by industry standards, unlike silica gel which will only absorb 3% more.

These desiccants will maintain this level of RH while also preventing rust, mildew and corrosion damage inside a waterproof and moisture vapour-proof container.

Product Code Unit Size of bag
(US Standard)
Nominal Desiccant
Content (g)
Nominal Dimensions
(mm) – W x L
Pack Size
ANTAC/D001100 1/6U 5.5 60 X 60 1500
ANTAC/D002100 1/3U 11.5 90 X 60 1000
ANTAC/D003100 1/2U 17.5 80 X 65 500
ANTAC/D004100 1U 35 100 X 65 300
ANTAC/D005100 2U 70 115 X 85 200
ANTAC/D006100 4U 140 155 X 85 100
ANTAC/D007100 8U 280 150 X 145 50
ANTAC/D008100 16U 565 260 X 145 30
ANTAC/D009100 32U 1120 265 X 200 15

Carrier Tape Homogenous PS+C Type K, L & O

Embossed Carrier Tape

PS+C (Polystyrene plus Carbon) carrier tape is an alternative to the tri-laminated formulations. The specially modified static dissipative polystyrene offers sufficient strength and stability over time and temperature variations for limited range of tape designs. It is available in a variety of thicknesses, enabling the appropriate selection for your application.

Shelf Life and Storage

We recommend that PS+C carrier tapes be used within 5 years from the date of manufacture. Store this product in its original packaging in a climate controlled environment where temperature ranges from 21°C +/- 17°C (70°F +/- 30°F). This product is not affected by humidity. Allow the product to stabilize at room temperature prior to use.

Camber

The Homogeneous PS+C series meets the EIA-481-D standard for camber that is not greater than 1mm in 250 linear millimeters. For 8mm to 24mm carrier tape in the level wind format, the camber will not be greater than 2mm in 250 linear millimeters.

Homogenous PS+C Carrier Tape Material Properties

The values presented for this product are typical laboratory data and may be changed without notice.

 

Type K Type L Type O Test Method
Standard Thickness 0.25mm 0.30mm 0.35mm
Specific Gravity 1.06 g/cc 1.06 g/cc 1.06 g/cc ASTM D-792
Tear Strength LD 0.30 lb
TD 0.49 lb
LD 0.30 lb
TD 0.49 lb
LD 0.30 lb
TD 0.49 lb
ASTM D-1938 [4]
Elongation LD 65%
TD 56%
LD 65%
TD 56%
LD 65%
TD 56%
ASTM D-882 [5]
Tensile Strength LD 3210 psi
TD 2765 psi
LD 3210 psi
TD 2765 psi
LD 3210 psi
TD 2765 psi
ASTM D-882 [5]
Vicat Softening 100°C  (213°F) 100°C  (213°F) 100°C  (213°F) ASTM D-1525
Surface Resistivity <1012 > 105
ohms/square
<1012 > 105
ohms/square
<1012 > 105
ohms/square
ASTM D-257 Static Dissipative per EIA 541

 

Cover Tape Compatibility

Material AA AHP ABX ATA PS3 APC AHPC
K, L & O Homogenous
(Polystyrene + Carbon)
X X X X X
Download PDF spec sheet of this product here

Interested in this product?

For further information on this product please contact us, one of our experienced sales advisors will be in touch shortly.

Contact us on:

Enquire
26/09/16
New centre of excellence announced by UK tech company - We are pleased to announce we have moved our UK operations to new Global Headquarters in Bury St Edmunds, Suffolk UK
All News